5.5" long and
2 Oz
size, stainless steel thru-wired this is a copy of an original Danny
Pichney Conrad Junior metal lip swimmer,
right down to the original Conrad style lips which reduced roll and give a nice
tight wiggle swim.
All kits are
sanded out to 150 grit and require minimal sanding.
Kits are weighted with one belly weight only-can
easily be re-drilled for heavier weight.
Very nice swim action and is designed primarily as a big bass lure.
Casts very well for a metal lip swimmer too!
All components are included except for split rings and hooks which we
recommend a pair of VMC 2/0 treble hooks
for the belly
and a dressed buck tail stub on the tail of this lure.
We use only USA made components in our kits!
Very simple retrieve on this lure, it
will tail wag right on top.
This
swimmer is a good intermediate kit. It requires gluing the lip in,
gluing the weight in, minor
sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled
with precision and duplication second to none!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
durability.
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here:
Lure Hardware
|