| Pre-Drilled Wood
Lure Turning Squares |
|
 WARNING:
Sanding these products can expose you to Wood Dust, which is known to
the
State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Saltys is a small business and exempt from
California Proposition 65 warning requirements,
but choose to provide them voluntarily for known chemicals per
California law.
Wash hands
after handling, DO NOT smoke or eat with contaminated hands!
Keep away from children and do not ingest! USE COMMON SENSE! |
| 3/4" Squares |
|
|
3/4 (.75")x5 3/8"
Soft Maple turning squares
Perfect for Stubby
Needlefish lures!
Pre-drilled through end to
end with standard .1875 hole.
Straight grain #1 furniture grade wood. No knots.
We hand select all our wood from the mill directly!
These are the same squares we use for turning our finished lures.
Perfect for turning your own
stubby needles!
The pre-drilled holes give
you a great place to line up the wood
in your head and tail stock too!
Can be easily re-drilled to
add weight into the rear of the blank.
These blanks are drilled on a
high speed CNC machine-each one is checked that a wire goes through
every time. How many times have you ruined a home made lure project from
a bad drill! Through-drilling is the #1 complaint we have heard from
people over the years!
Be advised that inventory is subject to vary at
different times of the year.
Turns, sands, and seals easily and will take
paint very well. |
This blank will make a stubby
style needlefish lure,
a small pencil popper, small floating needlefish, pocket rocket, etc.
|
|
1" Soft Maple
Turning Squares |
WARNING:
Sanding these products can expose you to Wood Dust, which is known to
the
State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Saltys is a small business and exempt from
California Proposition 65 warning requirements,
but choose to provide them voluntarily for known chemicals per
California law.
Wash hands
after handling, DO NOT smoke or eat with contaminated hands!
Keep away from children and do not ingest! USE COMMON SENSE!
|
|
Pre-drilled through end to
end with standard .1875 hole. Straight grain #1 furniture grade wood. No
knots. We hand select all our wood from the mill directly! These are the
same squares we use for turning our finished lures.
Perfect for turning your own
full size needles!
The pre-drilled holes give
you a great place to line up the wood
in your head and tail stock too!
Can be easily re-drilled to
add weight into the rear of the blank.
These blanks are drilled on a
high speed CNC machine-each one is checked that a wire goes through
every time. How many times have you ruined a home made lure project from
a bad drill! Through-drilling is the #1 complaint we have heard from
people over the years!
Be advised that inventory is subject to vary at
different times of the year.
Turns, sands, and seals easily and will take
paint very well.
We very highly recommend that you pre-cut the length close to what you
will want before it's turned, that way if there is any error on the
inside drill you won't see it on a cut end. Drills sometimes will try to
follow the grain on the wood. |
|
|
|
5/4 (1.25")x10"
Yellow Birch Turning Squares |
WARNING:
Sanding these products can expose you to Wood Dust, which is known to
the
State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Saltys is a small business and exempt from
California Proposition 65 warning requirements,
but choose to provide them voluntarily for known chemicals per
California law.
Wash hands
after handling, DO NOT smoke or eat with contaminated hands!
Keep away from children and do not ingest! USE COMMON SENSE! |
|
Pre-drilled through end to
end. Straight grain #1 furniture grade wood.
No knots. We hand select all our wood from the mill directly! These are
the same squares we use for turning our finished lures. Perfect for
turning your own needles!
The pre-drilled holes give
you a great place to line up the wood
in your head and tail stock too!
Can be easily re-drilled to
add weight into the rear of the blank.
Turns, sands, and seals easily and will take paint very well.
These blanks are drilled on a
high speed CNC machine-each one is checked that a wire goes through
every time. How many times have you ruined a home made lure project from
a bad drill! Through-drilling is the #1 complaint we have heard from
people over the years!
Be advised that inventory is subject to vary at
different times of the year.
We very highly recommend that you pre-cut the
length close to what you will want before it's turned, that way if there
is any error on the inside drill you won't see it on a cut end. Drills
sometimes will try to follow the grain on the wood.
|
 |
|
|
|
5/4 (1.25")x11"
Flame Birch Turning Squares |
|
| Looks similar to this when turned. Each
piece was culled out of our turning squares for it's bright irridescent
flame pattern in the wood. These make great looking needles and swimmers
finished naturally as seen here. Limited inventory. |
 |
|
|
6/4 Soft Maple Squares
Full 1.5x1.5x8.5" blanks
Another Salty's exclusive!
PERFECT size for darters, Conrad swimmers, even some nice fat needles
and poppers work well with these!
Vacuum dried to less than 7% moisture.
WARNING:
Sanding these products can expose you to Wood Dust, which is known to
the
State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Saltys is a small business and exempt from
California Proposition 65 warning requirements,
but choose to provide them voluntarily for known chemicals per
California law.
Wash hands
after handling, DO NOT smoke or eat with contaminated hands!
Keep away from children and do not ingest! USE COMMON SENSE! |
 |
|
|
| |
| |
| |
|
| 1.5" Cedar Turning
Squares |
|
1.5x6" Red Cedar Turning
Squares, straight grain.
Drilled 3/16 through end to end to work with our grommets.
Can be easily re-drilled for adding weights etc. Through-hole meets
every time!
|
This blank will make a spook
style topwater lure,
a small pencil popper, big mouth popper, small floating needlefish,
metal lip swimmers, anything you want to stay on top. |
|
|
|
1.5x10" Red Cedar
Turning Squares, straight grain.
Drilled 3/16" through end to end on center.
Great for big pencil poppers, floating needles, swimmers, spooks, etc. |
WARNING:
Sanding these products can expose you to Wood Dust, which is known to
the
State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Saltys is a small business and exempt from
California Proposition 65 warning requirements,
but choose to provide them voluntarily for known chemicals per
California law.
Wash hands
after handling, DO NOT smoke or eat with contaminated hands!
Keep away from children and do not ingest! USE COMMON SENSE! |
 |
|
|
|
|
|
|
|
1.5x10" Yellow Cedar Turning Squares, straight grain.
Drilled 3/16" through end to end on center. Works with the nose &
tail grommets found on our hardware page.
Great for big pencil poppers, floating needles, swimmers, spooks, etc.
WARNING:
Sanding these products can expose you to Wood Dust, which is known to
the
State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Saltys is a small business and exempt from
California Proposition 65 warning requirements,
but choose to provide them voluntarily for known chemicals per
California law.
Wash hands
after handling, DO NOT smoke or eat with contaminated hands!
Keep away from children and do not ingest! USE COMMON SENSE! |
|
|
|
|
|
|
|
Alaskan Yellow Cedar Turning
blanks will sand out to a very fine finish.
Since AYC is similar to POC or Red Cedar the same precautions apply in
regards to turning safety and dust control.
Remember to use good dust collection or a
respirator when sanding any kind of cedar.
They contain a very defined crystalline structure which is bad to
inhale. All cedars are this way.
Also make sure you use a good quality hiding primer so you don't have
problems with bleeding which are prevalent with all cedars.
Yellow cedar is one of the most enjoyable woods to not only turn but
work with and even fish.
It's very buoyant with a specific gravity of around .55 but at the same
time it's very dense and slow growing.
|
