| 
		  7" long and 
		2 Oz 
		size, stainless steel thru-wired this is a great swimmer! 
		Oversized 1/2" molded eyes! 
		All kits are 
		sanded out to 150 grit and require minimal sanding. 
		 The belly grommet holes 
		are recessed flat, and we used a oversize belly weight to eliminate some 
		roll.  
		This swimmer is an exact copy of an original Danny Pichney Sandeel Swimmer 
		lure.  
		Can easily be made into a sloped head lure also with some sanding! 
		All components are included except for split rings and hooks which we 
		recommend VMC 2/0 treble hooks for the belly  
		and 5/0 Siwash or a bucktail stub on the tail of  this lure.  
		We use only USA made components in our kits! 
		Very 
		simple retrieve on this lure, it will tail wag right on top. This 
		swimmer is a good intermediate kit. It requires gluing the lip in, 
		glueing the weight in, minor 
		sanding, and painting/finishing. 
		These kits are all turned on our dedicated kit cnc machine and drilled 
		with precision and duplication second to none! 
		Can be painted with 
		Salty's Lure Paint, Createx Air brush 
		paints, or with acrylic paints and a small brush 
		from AC Moore,  
		let them dry thoroughly and coat with a few coats of 
		clear spray paint or brush with epoxy etc in thin coats for more 
		durability. 
		Lures need to be finish sealed to prevent water intrusion. More 
		information on our free lure forum linked above. 
		We carry a full line of epoxy topcoats, hooks, paint, etc here:
		Lure Hardware 
   |