3.5" long and 1.5
size, stainless steel thru-wired this is a great little swimmer!
Oversized 5/8" molded eyes!
All kits are
sanded out to 150 grit and require minimal sanding.
components are included except for split rings and hooks which we
recommend 2/0 treble hook for the belly
and 5/0 dressed Siwash on the tail of this lure.
We use only USA made components in our kits!
We did a run of these a few years ago.
They were very popular! We sold out of them and haven't been back to
them since because some dodo lost the computer file.
These are made of the ends of stock. It takes a long time to accumulate
enough stuff to run the machines in this profile,
also they're small in the lathe which makes them harder to do because
everything is so tight/close together.
simple retrieve on this lure, it will tail wag right on top. This
swimmer is a good intermediate kit. It requires gluing the lip in, minor
sanding, and painting/finishing.
These kits are all turned on our dedicated kit cnc machine and drilled
with precision and duplication second to none!
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here: