| 
		 There's nothing small 
		about this lure!  
		6-7 Oz 
		size, stainless steel thru-wired this is a GIANT copy of an original  
		Danny 
		Pichney A40 swimmer with giant 1" eyes and our Godzilla sized Danny lip on 
		it too! 
		These will dive and swim with a nice wiggle side to side.  
		Meant to be 
		trolled from a boat but if you've got a heavy enough rod then have at it 
		for surf too! 
		All kits are 
		sanded out to 150 grit and require minimal sanding-see the special notes 
		below! 
		 
		All components are included except for split rings and hooks, which we 
		recommend VMC 5/0 treble hooks for the belly  
		and a dressed tail on this lure.
		We use only USA made components in our kits! 
		Lure is made of beautiful clear vertical grain Alaskan Yellow Cedar. 
		
		This 
		swimmer is an intermediate kit.  
		It requires gluing the metal lip & eyes in,
		minor 
		sanding, and painting/finishing.  
		These kits are all turned on our dedicated kit cnc machine and drilled 
		with precision and duplication second to none! 
		Can be painted with 
		Salty's Lure Paint, Createx Air brush 
		paints, or with acrylic paints and a small brush 
		from AC Moore,  
		let them dry thoroughly and coat with a few coats of 
		clear spray paint or brush with epoxy etc in thin coats for more 
		durability. 
		Lures need to be finish sealed to prevent water intrusion. More 
		information on our free lure forum linked above. 
		We carry a full line of epoxy topcoats, hooks, paint, etc here:
		Lure Hardware 
   |