Custom 3D shaping
and another Salty's exclusive!
I believe this is the first 3d fishing lure kit ever made! I worked on
this project for almost 1 year to get to this point. It's our first
fully computer designed 3D cut lure!
We've made it easy and simple to duplicate a real nice symmetrical
perfect profile-the body easily sands down until there's no cross
hatches visible anymore!
At a full 7.5" long, Finished size ~4oz., this closely resembles an
adult menhaden/bunker.
With it's large .092 magnum stainless screw eyes this lure will stand up
to virtually any saltwater gamefish!
Heavy/Large size belly
keel weight as in the originals made famous by the professor himself.
Includes a pair of our retro yellow flat eyes as used in the lures of
yesteryear.
All parts included
except for hooks and split rings. We recommend Rosco 5H split rings and
VMC 3/0 9626 Permasteel Saltwater treble hooks.
No tail hook is used on this lure-just a dressed bucktail stub.
Lure can optionally be routed inside with a dremel or carving tool to
make lure through wired. Do this before the halves are glued for best
results.
Rattles can be installed inside very easily by hollowing out a space.
The dual shell architecture lends itself to some interesting ideas.
This is an advanced kit and not meant for
first time or inexperienced builders. We give you a 3D profile which is
glued together to get the full profile,
it's predrilled for the belly keel weight only, all other holes are
drilled by the builder with a simple battery drill or a drill press.
Requires 1/16+1/4" drill bits, drill, epoxy, foam backed sandpaper,
pliers, pair woodworking clamps, and a file.
Can be painted with
Salty's Lure Paint, Createx Air brush
paints, or with acrylic paints and a small brush
from AC Moore,
let them dry thoroughly and coat with a few coats of
clear spray paint or brush with epoxy etc in thin coats for more
durability.
Lures need to be finish sealed to prevent water intrusion. More
information on our free lure forum linked above.
We carry a full line of epoxy topcoats, hooks, paint, etc here:
Lure Hardware
Limited availability! Due to how long it
takes to manufacture these they will be in short supply.
|