| 
		 6.25" long and 1.5 Oz 
		size, stainless steel thru-wired this is a super needlefish!  
		3/8" molded holographic eyes and all kits are 
		sanded out to 150 grit and require minimal fine sanding.  
		Highly polished nickel plated marine brass tail will spin and flop 
		causing it to seductively flash and attract fish! 
		All 
		components are included except for split rings and hooks which we 
		recommend VMC 1/0 treble hooks for the belly hooks. 
		We use only USA made components in our kits! 
		Very simple retrieve on this lure, walk 
		it up top, or let it sink and fish the bottom. This lure has a moderate rate 
		sink. 
		This 
		needlefish is a good intermediate kit, it requires gluing in belly 
		weight and redrilling with a 5/32 drill bit after weight is installed-we 
		recommend a small battery drill  
		or a hand drill to do this cautiously, 
		then minor 
		sanding, sealing, and painting/finishing. 
		 
		Can be painted with 
		Salty's Lure Paint, Createx Air brush 
		paints, or with acrylic paints and a small brush 
		from AC Moore,  
		let them dry thoroughly and coat with a few coats of 
		clear spray paint or brush with epoxy etc in thin coats for more 
		durability. 
		Lures need to be finish sealed to prevent water intrusion. More 
		information on our free lure forum linked above. 
		We carry a full line of epoxy topcoats, hooks, paint, etc here:
		Lure Hardware 
		 |