| 
		 5.5" long and 
		2 Oz 
		size, stainless steel thru-wired this is a copy of an original Danny 
		Pichney A40 Junior metal lip swimmer,  
		right down to the Conrad style lips which reduced roll and give a nice 
		tight wiggle swim. 
		All kits are 
		sanded out to 150 grit and require minimal sanding. 
		 Kits are weighted with one belly weight only-can 
		easily be re-drilled for heavier weight.  
		Very nice swim action and is designed primarily as a big bass lure. 
		Casts very well for a metal lip swimmer too! 
		All components are included except for split rings and hooks which we 
		recommend a pair of VMC 2/0 treble hooks  
		for the belly
		and a dressed buck tail stub on the tail of  this lure.  
		 
		We use only USA made components in our kits! 
		Very 
		simple retrieve on this lure, it will tail wag right on top, and will 
		dive slightly on faster retrieve.  
		This 
		swimmer is a good intermediate kit. It requires gluing the lip in, 
		gluing the weight in, minor 
		sanding, and painting/finishing. 
		These kits are all turned on our dedicated kit cnc machine and drilled 
		with precision and duplication second to none! 
		Can be painted with 
		Salty's Lure Paint, Createx Air brush 
		paints, or with acrylic paints and a small brush 
		from AC Moore,  
		let them dry thoroughly and coat with a few coats of 
		clear spray paint or brush with epoxy etc in thin coats for more 
		durability. 
		Lures need to be finish sealed to prevent water intrusion. More 
		information on our free lure forum linked above. 
		We carry a full line of epoxy topcoats, hooks, paint, etc here:
		Lure Hardware 
		
		  |