5.5" long and 
		2.5 Oz 
		size, stainless steel thru-wired this is a great swimmer! 
		Oversized 1/2" molded eyes!
		All kits are 
		sanded out to 150 grit and require minimal sanding. 
		
Dannies can be one of 
		the most deadly swimming lures! They wobble across the top with a nice 
		seductive action. 
		All components are included except for split rings and hooks which we 
		recommend either
		VMC 3/0 or 4/0 treble hooks for the belly
		and a VMC 6/0 dressed siwash on the tail of this lure.
		
		We use only USA made components in our kits!
		Very 
		simple retrieve on this lure, it will tail wag/wobble right on top. 
		
		This swimmer is an advanced kit. It requires installing lead 
		weights with epoxy and re-drilling the thru-wire with a 5/32x4" drill 
		bit. 
We recommend this is done with a battery drill or hand drill for 
		safety. 
		It requires sealing, minor 
		sanding, and painting/finishing.
		These kits are all turned on our dedicated kit cnc machine and drilled 
		with 
		precision and duplication second to none!
		Can be painted with 
		Salty's Lure Paint, Createx Air brush 
		paints, or with acrylic paints and a small brush 
		from AC Moore, 
		let them dry thoroughly and coat with a few coats of 
		clear spray paint or brush with epoxy etc in thin coats for more 
		durability.
		Lures need to be finish sealed to prevent water intrusion. More 
		information on our free lure forum linked above.
		We carry a full line of epoxy topcoats, hooks, paint, etc here:
		Lure Hardware